1 2 3 4 5 6 7 8 9 10
slide-left
Accupoint 2
Microprocessor-based moisture transmitter, with built-in dual-stage pressure regulator and operating pressure range of 50-3000 psig.
Accupoint LP2
For low process pressure (5-100 psig) applications, the Accupoint LP2 microprocessor-based moisture transmitter delivers …
AquaVolt 2
With a range of 0.5-1000 ppmV, the AquaVolt 2 provides precise, online moisture monitoring for
AquaVolt+
With a range of 35 ppb-20 ppm, the AquaVolt+ can be used in high-purity gas,…
Iceman
Iceman addresses the special temperature-controlled sample conditions required for moisture analysis in HFCs and refrigerants.
Uber M-i
World’s smallest, lowest-cost absolute moisture monitor, the Uber M-i offers proven stability, precision, and repeatability…
MedOx
For online moisture analysis in medical gases…
NastyBoy
Online analyzer for moisture in chlorine, the NastyBoy stands up to the toughest applications…
Tracer 2+
Tracer 2+ addresses the need for accurate, reliable process controls, and moisture sampling at levels…
WaterBoy 2
WaterBoy 2 offers a cost effective solution for reliable, portable “on-the-go” moisture analysis…
slide-left



 
MEECO WaterBoy 2 Proves Highly Accurate in KRISS Tests



The Korea Research Institute of Standards and Science (KRISS) supplied the chart below, which documents the great accuracy of MEECO’s WaterBoy 2. Evaluation of the instrument was conducted in 2009 by the metrology institute’s gas analysis unit that was headed by Dr. Sang Hyub Oh (now retired). The chart demonstrates extremely close correlation between the generated standard concentration (shown in red) and instrument response from low to high ppm (shown in blue). On average, the measured value deviates less than 3 % from the generated standard, demonstrating high instrument accuracy. Furthermore, the WaterBoy 2 offers a linear response over the concentration range tested here (20-140 ppm).




         
Client Testimonials
The lab here at Louisville Packaging has been using the MEECO Iceman since 2004 to test moisture in fluoroproducts for DuPont. We find the MEECO Iceman very reliable for repeatability studies with other labs using the same piece of equipment. The MEECO Iceman is used for testing moisture in our raw materials that are received and finished products that are shipped all over the world, which makes us really depend on the accuracy of this piece of equipment.
-Jimmie W. Baggett
Louisville Packaging







While using the Aquavolt+ I found that it responded faster to changes in moisture levels and cleaned up faster than the GE/Panametrics units we have been using. I also like the fact that the entire unit is in one enclosure. I have spent countless hours programming GE units and dealing with broken or incorrect wiring between the box and the cell. It will be nice to be able to send the entire Aquavolt+ unit in for annual calibration and get a complete, programmed and working unit back.
-Shawn Lambeth
Purity Systems







We trust MEECO analyzers to monitor the nitrogen used in the space shuttle. MEECO’s products are top quality and their service is excellent.
-Steven Jordan
Air Liquide







 
Latest News
MEECO is proud and honored to pass our ISO 9001 audits for the 11th year in a row!

MEECO congratulates Butler Gas, another family business.

"In Her Father's Footsteps," by Crissa Shoemaker Debree
The Intelligencer

You can also watch the interview with CEO of MEECO, Lisa Bergson, here!



Contact Us
Call Us (215)343-6600 sales@meeco.com
Call Us   Email Us  

Like us on FacebookFollow Us connect With Us
Like UsFollow UsConnect with Us