|
Moisture monitoring in industrial gas production is critical in all stages of manufacturing. Moisture measurement takes place in many areas of the bulk gas facility from the pre-purification processes to bulk tank filling to final truck fill quality control. In the industrial packaged gas plant, moisture monitoring is also used during various stages of production, such as reclamation, container preparation, filling, and quality control.
|
|
Accupoint 2™
The Accupoint 2 is a microprocessor-based moisture transmitter with a built-in dual-stage pressure regulator and an operating pressure range of 50-3000 psig. It’s ideally suited for most industrial, natural, and process gas streams. |
 |
|
Accupoint LP2™
The Accupoint LP2 is a microprocessor-based low pressure (5-100 psig) moisture transmitter. Whether checking moisture in bulk gas trailers prior to filling or measuring a sample stream after the process pressure reduction, the Accupoint LP2 delivers reliable moisture measurement. |
 |
|
AquaVolt 2™
The AquaVolt 2 provides precise, on-line moisture monitoring for industrial gases in production and at various stages of product purification. It’s also suited for trailer and cylinder filling monitoring, as well as for shielding gases used in welding. AquaVolt 2 Data Sheet (PDF) – English |
 |
|
AquaVolt+™
With a range of 35 ppb-20 ppm, the AquaVolt+ can also be used to monitor moisture in the production and filling of industrial gases. AquaVolt+ Data Sheet (PDF) – English |
 |
|
Uber PRO™
Now you can have it all! Low cost and high performance, with the world’s smallest absolute trace moisture analyzer! Loved for its exceptionally low cost of ownership and no-fuss operation, the Uber has gone “PRO” with its powerful, new processor, featuring 32GB of memory storage, allowing for troubleshooting and trend analysis. Also, you can readily change units of measure and gas type, using the PRO’s 3-button keypad.
Exceptional features include:
Uber PRO Data Sheet (PDF) – English
Uber Family Data Sheet (PDF) – English
|
 |
|
WaterBoy 2+, WaterBoy 2 & LP2™
The WaterBoy 2+ offers a cost effective solution for reliable, portable moisture analysis. Its modular design and sturdy construction is ideal for field conditions. It comes equipped with an internal rechargeable battery, in addition to a 120 Vac transformer or a 100-240 Vac universal transformer. The WaterBoy LP2 is available for sample gas inlet pressures below 100 psig. WaterBoy 2+ (PDF) – English |
 |
| WaterBoy LP2 (PDF) – English |
